Filter
Top Products
8
Installations and Operation:
Stereo Operation (Two Amplifiers):
Connect one SPA100 between the left channel output of your stereo signal source and your left channel speaker(s). Connect anoth-
er SPA100 between the right channel output of your stereo signal source and your right channel speaker(s). The minimum impedance
for the speaker(s) is 4 ohms for each amplifier.
LINE
INPUTS
SPEAKER
OUTPUTS
4 OHMS MIN
USE ONLY
250V FUSE
115V 60Hz
FUSE: T3AA, 250V
110-120
220-240
230V 50Hz
FUSE: T2A, 250V
LINE
INPUTS
SPEAKER
OUTPUTS
4 OHMS MIN
USE ONLY
250V FUSE
115V 60Hz
FUSE: T3AA, 250V
110-120
220-240
230V 50Hz
FUSE: T2A, 250V
LEFT OUT
RIGHT OUT
CH.1
OUT
CH.2
OUT
CH.1
IN
CH.2
IN
RIGHT
SIDE
LEFT SIDE AMP RIGHT SIDE AMP
LEFT
SIDE
8 OHM SPEAKERS
(PE12, PE15, etc.)
8 OHM SPEAKERS
(PE12, PE15, etc.)
MIXING CONSOLE
(CSX12, CMX62, etc.)
GRAPHIC EQ
(LS2-215, LS2-231)
SPA100 1/2-Rack Power Amplifier