Filter
Top Products
Chapter 4 - CompatiView Software Installation 13
two most common IPX frame types upon startup (802.2 and 802.3
(raw)). If CompatiView has the IPX/SPX protocol selected as its trans-
port, it will be necessary to either powerup the server before powering
up the workstation, or reboot the workstation after the server has
completed its boot sequence. This process will ensure that the worksta-
tion and the server have the proper IPX network bindings for communi-
cation.
For more information on using CompatiView management software to
configure your server, see Chapter 6 - Basic Configuration Guide.