Filter
Top Products
CARE and HANDLING
11
The interior of the unit requires no special care, due to the use of sealed controls and
gold plating on contacts. If it becomes necessary to clean the exterior, a simple dusting
may be all that is required. If a cleaner is necessary, any dilute commercial ammonia
based product will be appropriate. NEVER use any abrasive rags, cleaners or chemical
solvents on the preamp.
When handling the unit, take care not to mar the aluminum. Aluminum is a medium
hardness metal and can be scratched by the harder tool steels.
Avoid exposing the unit to direct sunlight, and keep it away from sources of intense
heat.
If you wish to rack mount your FET PREAMPLIFIER 02b, it is advised to place nylon
washers under the heads of the mounting screws to avoid scratching the anodized finish.
Do not throw away the carton or associated packing material. They are ideal if you
need to pack the unit for moving, and in the unlikely event that servicing is needed, they
will be necessary for safe shipment.
Be sure to provide adequate insurance when shipping.