Filter
Top Products
- 13 -
Using the Battery Pack (DC)
The rechargeable battery pack can be used for approximately 300 charge-cycles without any
noticeable change in performance.
Important: The battery should be charged fully (minimum 4 hours) before its initial use to
ensure optimum lifetime performance.
To install the battery pack:
Place the battery into the recessed cradle located on the bottom of the player.
Insert the battery hooks into their slots and slide the battery into place. Slide the OPEN
(release) button up to lock the battery in place.
To release the battery, slide the OPEN (release) button down in the direction of the arrow,
and then slide the battery out.
To charge the battery pack:
Install the battery in the manner described above.
Connect the player to an AC power source with the AC/DC adapter as described above.
(The Battery Charge indicator will light red while it is charging; it will light green when the
battery is fully charged.)
Note:
When the battery charge level is low, the unit will enter STANDBY mode automatically.
1.
2.
3.
1.
2.
GETTING STARTED
OPEN Switch
(release)
battery hooks
battery cradle