Filter
Top Products
- 12 -
Remote Control
Refer to the diagram. Remove the bat-
tery compartment cover located on the
rear of the remote control. Insert batter-
ies, making sure to match their polari-
ties (+/-) to the markings on the inside of
the compartment. Replace the cover.
To use the remote, point it at the remote
sensor of the player. Operate the re-
mote within 15 feet of the sensor and at
an angle of +/- 60 degrees.
Batteries in the remote will last for ap-
proximately 1 year. Replace the batter-
ies if the remote control does not work.
Do not mix old with new batteries, or
different types of batteries.
Remove the batteries from the remote
if it will not be used for a long period
of time.
WARNING
The battery used in this device may present a re or chemical burn if mistreated. Do not
recharge, disassemble, incinerate, or heat the battery (~212
○
F).
Keep batteries away from children.
Power Supply
Using the AC/DC Adapter
This AC/DC adapter should be used
with 100-240V 50/60Hz AC wall out-
lets.
DC Out: 9V
DC Current: 2.0A min.
Caution:
Do not connect the power plug
to a power outlet other than that
which is indicated here and on the
label as this may result in the risk
of re or electric shock.
Do not handle the power plug with wet hands. Doing so may cause electric shock.
Only use AC adapters of the type specied here. Failure to do so may case a re or damage
the player.
•
•
•
•
•
•
•
•
•
•
•
GETTING STARTED
2 x “AAA” 1.5V batteries
To DC 9V IN
To wall outlet
(100-240V 50/60Hz)