COBY electronic DVD-958 Stereo System User Manual


 
JPEG PICTURE PLAYBACK
MP3 PLAYBACK
Place a JPEG picture CD in the disc tray, then the unit will load the disc
automatically.
Press [ ] to enter the thumbnail mode to preview the pictures.
In the thumbnail mode, use the direction keys to select a picture, then press [ENTER]
to start the playback from the selected picture.
In the thumbnail mode, use the direction keys and [ENTER] to make selections of the
Slide Show, Menu, PREV or NEXT at the bottom of the screen.
Slide Show: Start slide show playback.
Menu: Enter the instruction menu for remote key function. In the menu, press
[ENTER] to turn over to the next menu page and again to exit the instruction menu.
PREV/NEXT: Turn over to the previous/next page.
Remote key function introduction
[ ]: Enter the thumbnail mode to preview the pictures.
[ZOOM]: During playback, press [ZOOM], then press [ ]/[ ] to zoom in/out the
picture. When the picture is zoomed in, the direction keys can be used to move the
picture. Press [ZOOM] again to exit the zooming mode.
[ ]/[ ]: Skip to the next/ previous picture during playback.
[ ]: Press to pause a playback. Press it again to resume the playback.
[ ]/[ ]: Rotate the picture counterclockwise/ clockwise during the playback.
Playback
-19-
Insert a MP3 disc into the player, then a content menu will display on the screen.
MENU OPERATION:
Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter
the selected folder or play the selected file. You can also use the digit keys to make
selection of a folder to enter or a file to play.
[ ]/[ ]: Press [ ]/[ ] to turn over the menu page.
[ ] : Press the direction key[ ] to return to the previous menu.
[PROG]: Press repeatedly to switch between FOLDER playback mode and
FILELIST playback mode.
NOTE: During playback, [ ], [ ], [REPEAT], [A-B], [ ], [ ](press to stop the
playback), [VOLUME+/-], [MUTE], etc. are valid. Please refer to the remote control
function introduction in this chapter for details. Please refer to the REMOTE CONTROL
FUNCTION chapter for details.