Filter
Top Products
13
SD/MMC MODE
Select SD/MMC mode to play digital MP3/WMA audio les from an SD/MMC card. For
more information about MP3 or WMA digital audio les, please see the About MP3/WMA
Files section. Press FUNCTION to select SD/MMC mode.
Playing MP3/WMA Files from SD/MMC Cards
Transfer the MP3/WMA les onto the SD/MMC card you wish to connect (you may need to
use a computer and a SD/MMC card reader to do this).
Insert the SD/MMC card into the stereo’s SD/MMC card slot.
Press FUNCTION to select SD/MMC mode. The LCD will display “READING” while the
stereo scans for MP3/WMA les on the card. The more les that are on the card, the longer
it will take to complete the scan. When playback is stopped, the LCD will display the total
number of folders and MP3/WMA les on the card.
MP3/WMA Playback Controls
Press to start playback. Press again to pause playback or press to stop playback.
Press again to resume playback.
To select the next track, press . To fast forward through the current track, press and hold .
To select the previous track, press . To reverse through a track, press and hold .
If the card contains multiple folders, press BAND/FOLDER to change folders.
If the ID3 Display feature has been turned on in the MENU options (and the MP3 le being played con-
tains ID3 information), then the le name, song title, and artist name will be displayed on the LCD.
MP3/WMA Play Modes and Options
INTRO Mode
Press INTRO to toggle Intro Mode on or off. Intro mode will play the rst 10 seconds of
each track.
RANDOM Mode
Press RANDOM to toggle Random Mode on or off. Random mode will play your tracks in a
random, shufed order.
REPEAT Modes
While playback is stopped, press REPEAT to toggle through the following Random modes:
Repeat One (repeats one track)
Repeat All (repeats all tracks on the card)
Repeat Folder (repeats all tracks in the current folder)
REPEAT A-B Mode
Repeat A-B allows you to specify a segment of a track to play as a repeating loop.
During playback, press REPEAT twice to designate the beginning of the loop (Point A).
The LCD will display .
Press REPEAT again to designate the end of the loop (Point B). The LCD will display
and the track segment A to B will play in a repeating loop.
Press REPEAT again to exit the repeating loop and continue normal playback.
1.
2.
3.
•
•
•
•
•
•
•
•
•
1.
2.
3.