Classe Audio CT-2300 Stereo Amplifier User Manual


  Open as PDF
of 34
 
11
Front Panel
1 Standby button & LED indicator
e front panel Standby button will toggle the amplier between operate,
its fully operational state, and a standby mode that leaves the amplier o,
yet ready to respond to system commands via any of the supported control
options(e.g.IRinput,DCtrigger,CAN-Bus,orRS-232).
e current state of the amplier is indicated by the LED indicator in the
Standby button. e state of this LED indicates the following:
• on(dimred) = standby
• ashingblue(onpower-up)= initialization
• on(blue) = operate
• ashing (after power-up) = AC mains voltage out of range
• ashing
(combined red/blue)
= the air intake lter needs to be cleaned
• slow ashing (red) = protection circuit(s) engaged
1
CA-2300
CT-2300
 previous next