Filter
Top Products
4
XMD1/XMD2
5.WIRED REMOTE CONTROL UNIT OPERATIONS
PWR / FUNC Button
1
Turning on and off the power
Press the PWR button 1 to turn the power on and press and hold it
for 1 second or longer to turn the power off.
Changing the operation mode
Each time the FUNC button 1 is pressed, the mode switches in the
following order:
■ XMD1/XMD2 following operations are enabled by remote control with the Wired Remote Control Unit M101RC (sold separately).
WIRED REMOTE CONTROL UNIT
1PWR (Power) Button
FUNC (Function) Button
2VOLUME Up (w) / Down (z) Buttons
3BAND Button [
]
DISC Up Button [
]
4Play/Pause (s) Button [
] [ ]
MUTE Button [
]
5SEARCH Up(
) / Down ( ) Buttons
[
] : In the Radio Mode
[
] : In the CD Mode
[ ] : In the CD Changer Mode
Play/Pause (
s
) / MUTE Button
4
Pause (in the CD mode or CD changer mode)
Press the Play/Pause button 4. Playback pauses. To resume play-
back, press the Play/Pause button 4 again.
Mute (in Radio mode)
Press the MUTE button 4. The sound is muted immediately. To can-
cel, press the MUTE button 4 again.
SEARCH Up ( ) / Down ( ) Buttons
5
Selecting tracks (in CD changer mode or CD mode)
Press the SEARCH Up button 5 to start playback from the begin-
ning of the following track. Press the SEARCH Down button 5 to
start playback from the beginning of the current track. If pressed again,
the track moves to the previous one.
Fast-forward and fast-backward (in CD changer mode or CD
mode)
Press and hold the SEARCH Up button 5 to fast-forward the disc.
Press and hold the SEARCH Down button 5 to fast-backward the
disc.
* Pressing and holding the SEARCH Up/Down buttons for 1 second or longer
will move forward or backward 3 times faster than normal play, and pressing
and holding it for 3 seconds or longer will do the operation 30 times faster.
Changing preset stations (in the Radio mode)
Each time the SEARCH Up/Down buttons 5 are pressed, the pre-
set station switches in the following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....
or
6 ➜ 5 ➜ 4 ➜ 3 ➜ 2 ➜ 1 ➜ 6.....
Be careful about adjusting the volume, as turning on the power
while the volume is raised to its maximum may harm your hear-
ing.
CAUTION
Radio ➜ CD ➜ CD changer (XMD1 only)
Notes:
• If the above equipment is not connected, corresponding mode
cannot be selected.
• In CD mode, if no CD is loaded in XMD1/XMD2, “DISC” flashes on
the display and the radio mode is selected.
VOLUME Up (
w
) / Down (
z
) Buttons
2
Adjusting the volume
Press the VOLUME Up button 2 to increase the volume and press
the VOLUME Down button 2 to decrease the volume.
BAND / DISC Up Button
3
Changing the band (in the Radio mode)
Each time the BAND button 3 is pressed, the band switches in the
following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1.....
Top function (in CD mode)
Press the button 3, then the CD will start from the first song (track
number 1).
Changing the disc (in the CD changer mode) XMD1 only
Each time the DISC Up button 3 is pressed, the disc switches in the
following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....