Filter
Top Products
9
OWNER’S MANUAL/INSTALLATION GUIDE
Headphone
indicator illu-
minated but no
sound.
Check Battery and
Ground wiring at tran-
mitter.
Power wires not
connected.
No power indi-
cator on head-
phone.
Insert (2) Alkaline AAA
batteries into headphone.
Insert Batteries with
proper polarity.
Batteries not
inserted.
Battery polarity
improper.
System does
not work.
Replace external fuse
with the same value.
Fuse is blown.
No sound from
headphone.
Select the proper audio
channel. (see Page 5)
Place headphone on head
to activate Micro switch.
Wrong audio
channel selected
Micro switch
not activated.
T
ROUBLESHOOTING
Symptom Cause Solution
FCC S
TATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a automotive instal-
lation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be verified by turning the unit
off and on, the user is encouraged to consult the dealer or an
experienced radio/television technician for help.