Filter
Top Products
5
B
ATTERY
I
NSTALLATION
1. Open the battery compartment by sliding the cover
toward the bottom of the Headphone.
2. Place two (2) alkaline AAA batteries into the battery
compartment of the Headphones, making sure that the
battery polarity is correct.
3. Snap the battery cover back into place.
O
PERATION
D
ESCRIPTION
PLEASE READ CAREFULLY TO PREVENT DAMAGE TO THE
HEADPHONES OR YOUR EARS.
1. Be sure batteries are properly installed in the
Headphones.
2. Turn the Headphone volume nearly off before turing on
the power switch.
3. Turn the Headphone power switch to the ON position.
4. Place the headphones on your head and the power indica-
tor will illuminate.
5. Adjust the Headphone volume to a comfortable listening
level.
Channel A/B Selection Switch
1. Select the appropriate channel (A/B) for the desired audio
source signal.
NOTE: Remove headphones and lower volume before switch-
ing between channels. The signal on one channel may be
louder than the other, resulting in possible hearing damage.
Figure 3. The Remote Headphone Battery Installation.
OWNER’S MANUAL/INSTALLATION GUIDE