Filter
Top Products
CLCK
7
Connecting using FM transmission
Wireless connection
The cradle supports ten FM transmission
frequencies.
1. Turn the Plug and Play receiver on.
DC IN FM OUT AUDIO
ANT
Vehicle FM radio
Power adapter
Vehicle radio antenna
Car antenna
Back
of cradle
2. Confirm that the FM Transmitter option is set to
FM ON. This is the default setting.
3. Select a frequency on the Plug and Play
receiver using the FM Transmitter option.
For more information, see the Plug and Play
Receiver User’s Guide.
4. Set your car radio to the same frequency.
You can mount the cradle directly to the dashboard
or another flat surface or you may mount it using the
mounting base in this kit.
1. Locate a firm, reasonably flat surface within
your vehicle to permit optimum viewing and
line-of-sight access by the supplied remote
control.
4. Install the cradle
Sirius_Shuttle_Vehicle_Installation.book Page 7 Tuesday, February 1, 2005 5:54 PM