Filter
Top Products
Vehicle Installation Guide
8
Do not install the cradle or mounting
base on a leather or fabric surface, or
in a position that could impair your
vision, block air bags or obstruct
vehicle dashboard controls, including
radio CD/cassette operational
displays.
Be very careful and plan ahead when selecting
the mounting location. If you use the adhesive
backing on the base you won’t be able to
reposition the receiver once you mate the
backing to the mounting surface.
To screw the base to the surface, avoid
unintentional damage by making sure the area
behind the mounting surface is clear of wires or
other items.
Caution
The fins on the mounting base are
pliable and can be bent to conform to
most mounting surfaces.
2. Using the alcohol swab, clean the mounting
surface and thoroughly wipe the area dry with a
clean, lint-free cloth.
3. Decide how to mount the cradle. Your choices
are:
• Install the cradle in the mounting base and
use the adhesive backing to fix the mounting
base to the mounting surface.
• Install the cradle in the mounting base and
use screws to fix the base to the mounting
surface.
Note
Sirius_Shuttle_Vehicle_Installation.book Page 8 Tuesday, February 1, 2005 5:54 PM