Filter
Top Products
21
NX404
English
English
Quick start guide
4. Touch your desired Cellular button to select the button for the cellular phone to
be registered, and touch[
] button to register for the Bluetooth cellular
phone.
• You cannot select the Cellular button of which another cellular phone is already
registered. Select a blank Cellular button.
5. If entering the Pass Key code is prompted on your cellular phone, enter the Pass
Key code set in this unit.
• You can change the Pass key setting of this unit from the Bluetooth Info screen
under the Telephone Settings screen.
When the pairing operation completes, the registered cellular phone is set as
the current telephone, and the display returns to the Telephone screen.
• To delete the cellular phone registration
1. Touch the [
] button to delete the device. A conrmation screen is
displayed.
2. Touch the [
] button to conrm delete.
Select the Cellular Phone
To change the current cellular phone to the other device which is already
registered, perform the following operation.
1. Touch the [
] button to display the Device Select screen.
2. Touch the currently connected device, then touch
[
] button to disconnect the active device.
3. Touch the desired Device button you wish to use. Touch [
] button to select
it as your active device. The corresponding cellular phone is set as the current
telephone.
• If the power of the cellular phone is not turned on, turn it on.
• The cellular phone may prompt to acknowledge the Bluetooth connection or to
enter the Pass Key code of this unit. Perform these operations according to the
message displayed.
4. Touch the [
] button to return to the previous screen.
Obtaining the Phone Book Data
Sending the Phone Book data from the cellular phone enables you to make a call
using the Phone Book function from this unit.
Telephone Operations
Making a call using the Ten-Key pad
1. Touch the [ ] button to display the Ten-Key pad screen.
2. Enter the telephone number by using the Ten-Key pad displayed on the screen.