Filter
Top Products
24 DXZ615
English
AC Processor Operations
Editing/storing a sound field menu
(User memory)
1. Select a sound field menu which you want to
edit on the basis of.
2. Press and hold ADJ button 2 for 1 second or
longer.
3. Press the right or left side of SEARCH button
% to select the item to be adjusted.
There are “EFFECT”, “DELAY”, “REAR MIX”,
“REV.TIME” or “ROOM SIZE” and “HIGH” or
“LIVENESS” available for the items to be ad-
justed.
∗
For details on each adjustment item, refer to the
owner’s manual supplied with the DPH913.
4. Turn the Rotary knob $ clockwise or coun-
terclockwise to make the adjustment.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button 2.
6. Press and hold one of Direct buttons 8 for 2
seconds or longer to store the edited contents.
∗ You can give a title to the user memory. For the
inputting method of titles, refer to the subsec-
tion “Entering titles” in section “Operations
common to each mode”.
Professional mode/VSE operations
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in easy mode. On the
contrary, the adjustment made in easy mode is not
reflected in the adjustment in professional mode.
VSE effect ON/OFF
While the “VSE” indication ¥ is lit in the display,
the S.EQ effect is set to “ON”.
∗ The factory default setting is “ON”.
1. Press A-M button @ and select “VSE”.
2. Press DISP button 0.
3. Press A-M button @. “VSE” in the display lit
or unlit.
∗ When “VSE” is unlit, the VSE effect is set to
OFF.
Note:
• If the VSE effect is set to OFF, the adjustment made
in “VSE operations” is not reflected in the music
source.
Selecting an VSE menu
1. Press A-M button @ and select “VSE”.
2. Press BND button ! to select “BASC” (ba-
sic). “BASC” is displayed in the function mode
indication 0 in the display.
3. Press one of Direct buttons 8 and select the
desired VSE menu.
∗ To select the user memory, press BND button
! to select “USR” and press one of Direct but-
tons 8.
Editing/storing an VSE menu (User
memory)
1. Select an VSE menu which you want to edit
on the basis of.
2. Press and hold ADJ button 2 for 1 second or
longer.
3. Press the right or left side of SEARCH button
% to select the item to be adjusted.
There are “DIFFUSE”, “CAR WIDTH” and “CAR
LENG” available for the items to be adjusted.
∗
For details on each adjustment item, refer to the
owner’s manual supplied with the DPH913.
4. Turn the Rotary knob $ clockwise or counter-
clockwise to make the adjustment. The adjust-
ment range is from 1 to 10 for each item.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button 2.
6. Press and hold one of Direct buttons 8 for 2
seconds or longer to store the edited contents.
∗ You can give a title to the user memory. For the
inputting method of titles, refer to the subsec-
tion “Entering titles” in section “Operations
common to each mode”.
Professional mode/P.EQ operations
P.EQ effect ON/OFF
While the “P.EQ” indication ¥ is lit in the display,
the P.EQ effect is set to “ON”.
∗ The factory default setting is “ON”.
1. Press A-M button @ and select “P.EQ”.
2. Press DISP button 0.
3. Press A-M button @. “P.EQ” in the display is
changed from blinking to lit or unlit.
∗
When “P.EQ” is unlit, the P.EQ effect is set to OFF.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “P.EQ operations” is not reflected in the
music source.