Clarion DXZ615 CD Player User Manual


 
DXZ615 23
English
AC Processor Operations
G.EQ effect ON/OFF
While the “G.EQ” indication ¥ is lit in the dis-
play, the G.EQ effect is set to “ON”.
The factory default setting is “ON”.
1. Press A-M button @ and select “G.EQ”. While
G.EQ” is selected, “G.EQ” blinks in the dis-
play.
2. Press DISP button 0.
3. Press A-M button @. “G.EQ” in the display is
changed from blinking to lit or unlit.
When “G.EQ” is unlit, the G.EQ effect is set to
OFF.
Note:
If the G.EQ effect is set to OFF, the adjustment
made in “G.EQ operations” is not reflected in the
music source.
Selecting a G.EQ menu
1. Press A-M button @ and select “G.EQ”.
2. Press BND button ! to select “BASC” (ba-
sic). “BASC” is displayed in the function mode
indication 0 in the display.
3. Press one of Direct buttons 8 and select the
desired G.EQ menu.
To select the user memory, press BND button
! to select “USR” and press one of Direct but-
tons 8.
Editing/storing a G.EQ menu (User
memory)
1. Select a G.EQ menu which you want to edit
on the basis of.
2. Press and hold ADJ button 2 for 1 second or
longer.
3. Press the right or left side of SEARCH button
% to select the frequency to be adjusted.
There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz,
3kHz and 12kHz available for the adjustment
frequency.
For details on each adjustment item, refer to the
owner’s manual supplied with the DPH913.
4. Turn the Rotary knob $ clockwise or counter-
clockwise to make the adjustment. The adjust-
ment range is from –6dB to +6dB.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button 2.
6. Press and hold one of Direct buttons 8 for 2
seconds or longer to store the edited contents.
You can give a title to the user memory. For the
inputting method of titles, refer to the subsec-
tion “Entering titles” in section “Operations
common to each mode”.
STD mode/DSF operations
DSF effect ON/OFF
When the “DSF” indication ¥ is lit in the display,
the DSF effect is set to “ON”.
The factory default setting is “ON”.
1. Press A-M button @ and select “DSF”.
2. Press DISP button 0.
3. Press A-M button @. “DSF” in the display lit
or unlit.
When “DSF” is unlit, the DSF effect is set to OFF.
Note:
If the DSF effect is set to OFF, the adjustment made
in “DSF operations” is not reflected in the music
source.
Setting the listening position menu
1. Press A-M button @ and select “DSF”.
2. Press the right or left side of SEARCH button
% to set the listening position type.
There are FULL SEAT, FRONT-RIGHT,
FRONT-LEFT, FRONT (only front seats),
REAR (only rear seats) and PASS available
for the listening position types.
The factory default setting is “FULL SEAT”.
Making fine adjustment of the
listening position
1. Upon completion of setting the listening posi-
tion, press ENT button #.
2. Press the right or left side of SEARCH button
% to select “BALANCE” or “FADER”. The se-
lected item blinks.
3. Turn the Rotary knob $ clockwise or counter-
clockwise to adjust the balance and the fader.
4. Press ENT button # to return to the DSF
mode.
Selecting a sound field menu
1. Press A-M button @ and select “DSF”. “DSF
blinks in the display.
2. Press BND button ! to select “BSC1” (ba-
sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2
is displayed in the function mode indication
0 in the display.
3. Press one of Direct buttons 8 and select the
desired sound field menu.
To select the user memory, press BND button
! to select “USR” and press one of Direct but-
tons 8.