Filter
Top Products
7
Mounting The Transmitter
The transmitter box can be mounted virtually anywhere in the
vehicle.
For optimum useage, mount away from vehicle computers,
vehicle wire harnesses or any other sources of noise.
Mount the unit securely with the provided adhesive tape so
that the unit doesn't move around when the vehicle is in
motion.
Mounting The Antenna
Mount the antenna as straight and as high in the vehicle as
possible.
Do not ground the antenna wire or allow the bare tip of the
antenna to touch metal.
Do not cut the antenna or alter its length in any way, as it will
change the operating frequency.
Do not wrap the antenna around the transmitter box.
Do not coil the antenna along any existing vehicle harnesses.
Testing The Unit
Make sure the unit is switched to on when testing.
Test for noise and frequency by switching from Channel 1 or 2
for the desired audio source signal.
NOTE: Remove headphones and lower the volume before
switching between channels. The signal on one channel may
be louder than the other, resulting in possible hearing damage.
Wiring Description
FinalManual.qxd 2/1/01 9:49 AM Page 7