Filter
Top Products
6
INSTALLATION
Precautions
Do not allow liquids or foreign objects to enter the WH105 RF
Transmitter or Headphones.
If any unit should become wet, turn off all power and let your
authorzied Clarion Dealer clean or service the equipment.
DO NOT ATTEMPT TO OPEN OR SERVICE THE RF
TRANSMITTER OR HEADPHONES. THE INTERNAL
PARTS ARE NOT USER-SERVICEABLE. DOING SO
WILL VOID THE WARRANTY.
Do not drop or excessively jar the WH105 headpones.
Do not use liquid cleaners on any surfaces. Only use a soft
(cotton or other non-static) cloth to wipe off fingerprints.
Do not subject the unit to direct sunlight or an extremely hot
environment (e.g., closed windows on a hot summer day,
direct path of heater vent, etc.)
Avoid using the products under the following contitions:
- After extended parking on an extremely hot or cold day
- Near strong magnetic fields
- In an environment with excessive humidity, dust, or
vibration (e.g., off-road travel, etc.)
Wiring
This unit operates on an automotive 12-volt negative ground
power source and requires additional mobile audio and video
components for proper operation.
Before installation, disconnect the (-) negative lead from the
vehcile's battery.
Attach the RF Transmitter to a location near your A/V Source
with the provided adhesive tape.
Connect the power and ground wire connectors to the 12Vdc
input. Connect black (-) wire to ground of the vehicle, and
red (+) wire to an accessory 12Vdc power source.
Connect the audio input to a low-level output. With this
connection, only the volume control on the earphones needs
to be adjusted to control volume level.
FinalManual.qxd 2/1/01 9:49 AM Page 6