Cisco Systems AIR-ANT1728 Stereo System User Manual


 
3
Cisco Aironet High Gain Omnidirectional Ceiling Mount Antenna (AIR-ANT1728)
78-14721-02
Installing the Antenna
Follow these steps to install the antenna on a suspended ceiling track.
Step 1 Determine the location you wish to mount the antenna.
Step 2 Loosen the hex nut on the ceiling track bracket.
Step 3 Position the bracket on the ceiling track. See Figure 1.
Figure 1 Positioning the Ceiling Track Bracket
Step 4 Squeeze the bracket firmly onto the ceiling track.
Step 5 Use a 7/16 inch (11.1 millimeter) wrench to tighten the hex nut. Do not overtighten.
Step 6 Carefully screw the antenna onto the bracket’s threaded stud until it is hand tight. See Figure 2.
Figure 2 Attaching the Antenna
78371
78372