Filter
Top Products
Replacing Fuses
If the unit does not function when plugged in ie. items plugged into unit do not operate, then it is likely that a fuse has
blown.
Unplug unit before attempting to replace fuses.
In order to replace the fuse, unscrew the “Fuseholder Cover” to reveal the fuse.
The unit has a label attached which indicates the correct fuse rating or you may refer to the Technical Specifications
section of this guide. It is most important that replacement fuses are of the correct rating.
Failure to use the correct fuse could damage the unit beyond economic repair.
the fuseholder and the screw cap replaced. It is now safe to plug the unit back in.
Cleaning
The body of the unit may be cleaned with a soft damp cloth. We recommend internal cleaning be carried out by a fully
qualified technician.
Maintenance & Servicing
Work on internal parts should be carried out by a qualified technician. Removal of any covers other than the
“Fuseholder” is considered a breach of warranty an will not be covered under any such agreement unless authorized by
CHAUVET.
Troubleshooting
• If the unit is not functional - check that unit is fully plugged in and then check fuses.
No user serviceable parts inside, please refer to CHAUVET
for service.
USA
Technical Assistance: 1-800-762-1084 (954) 929-1115
E-Mail tech@chauvetlighting.com
POWER 120V~/60Hz / 230V~50Hz
INTERNAL FUSE 5mm x 20 mm F500mA 250v
DIMENSION 19in x 10.4in x 3.3in 463mm x 254mm x 81mm
WEIGHT 7.92lbs / 8.14kg
User Information (Please complete for your records)
Date Purchased: / / Serial No: ________________
Dealer Stamp Model: TFX-24C