Filter
Top Products
7)Move the 14th channel slider to max. Position.
8)Move SPEED slider until 1.00 appear in display and SPEED LED is lit.
9)Press REC SPEED and FLASH 14, then release both keys, the 14th SCENE
program is set to run 1 step per second.
10)Move SPEED slider to SHOW MODE position. Press REC SPEED and the 14th
FLASH , then the 14th SCENE program is set to be controlled by SPEED
slider, move SPEED slider until 0.10 appears on display, the 14th program
will run with 10 steps per second.
15.SPEED SETTING
A: SLOWEST SPEED SLIDER SETTING(5 MIN)
1)Press and hold RECORD .
2)Press the 5th FLASH KEY 3 times, then release RECORD.
3)The 5 MIN LED is lit, which means that 5 MIN SPEED slider is done.
B: SLOWEST SPEED SLIDER SETTING(10 MIN)
1)Press and hold RECORD .
2)Press the 10th FLASH KEY 3 times, then release RECORD.
3)The 10 MIN LED is lit, which means that 10 MIN SPEED slider is done
9. ADD STEP
1) In EDIT mode .record the step to be inserted.
2) Press STEP to execute the program till the step you want to
insert before.
10. MODIFY STEP
1) In EDIT mode. Press STEP to execute the program till the step
to be modify.
2) press UP or DOWN and desired FLASH ,the output will show on
display ,you feel it is ok
,release FLASH.
11. CHANGE SHOWING MODE OF DIMMER
Press and hold RECORD, then press
0%or0-255 KEY.
12. SELECT AND RUN PROGRAM
1) Press MODE SELECT to light led. CHASE SCENES
2) Press PAGE to light the desired page led.
3) Move MASTER B slider to max. Position.
4) Move desired scene channel slider to min.,then move it up,the
program is selected and
executed.
13. RUN A PROGRAM WITH REGULAR BEAT
1) Press AUDIO to extinguish AUDIO led.
2) Press PARK to light MIX MODE LED.
3) Select to run the scene program.
4) Move the SPEED slider or press TAP SYNC twice to define beat
time.
5) Press REC SPEED and the desired FLASH KEY. Then the program
will be executed
with the beat time.
14. RUN A PROGRAM WITH SPEED SLIDER.
1) Press AUDIO to extinguish AUDIO led.
2) Press PARK to light MIX MODE led.
3) Select to run the scene program.
4) Move SPEED slider to SHOW MODE position.
5) Press REC SPEED, then press the appropriate FLASH.
For example: run the 14th SCENE program with the speed of 1 steps
per second, then set it to be controlled by speed
slider.
1)Press MODE SELECT to light LED. CHASE SCENES
2)Press AUDIO to extinguish its led.
3)Press PARK to light MIX MODE LED.
4)Move all channel sliders to min. Position.
5)Move MASTER B slider to max. Position.
6)Press PAGE to light PAGE 2 LED.
16.MIDI IN SETTING
1)Press and hold RECORD
2)Press 1th FLASH KEY 3 times, then release RECORD, when CHI appears on
display, you can select MIDI IN channel from 1th FLASH to 16th FLASH.
3)After you press desired FLASH, the appropriate channel led is lit.
4)Press RECORD and EXIT to withdraw MIDI IN setting.
PAGE 4