Cary Audio Design CAD-211M Stereo Amplifier User Manual


 
4
1.3
Top Panel Features
AC-ON SWITCH: Turns AC power on
STAND-BY SWITCH: Turns high voltage on
1.4
Rear Apron Features
OUTPUT: Three 5-way copper binding posts provide outputs for 4 ohm, 8 ohm and
16 ohm
AC: 3 conductor shielded power cord to AC power mains
INPUTS: One Single-Ended Input via gold plated RCA jack
One Balanced Input via XLR connector (Note: When using Balanced
Input, the toggle switch , located next to the XLR input jack, must
be flipped toward the XLR jack)
FUSE: AC power fuse. Never replace with any other fuse than 5 amp.
SLOW BLOW! 250 VOLT!
Tube fuse. Never replace with any other fuse than 1/2 amp.
FAST BLOW! 250 VOLT!
CAUTION
Use of any other protection
fuse can damage unit.
CAUTION
Never remove/insert
AC line cord when the
unit is "ON"