Filter
Top Products
SA-441-17 Installation and Operating Instructions Page 3 of 15
07/29/08 CP5008A
SPECIFICATIONS
Input Voltage 11 - 16 VDC (negative ground)
Input Current 17 AMPS (@14 VDC - dual 100W speakers)
Standby Current Less than 250 mA
Audio Frequency 200Hz - 10 kHz + 3db
Audio Distortion Less than 3% (@1 kHz - dual 100W speaker)
Audio Output 80 watts (@14 VDC - dual 100W speaker)
Audio Input 400 ohms + 10%
Output Power 210 WATTS RMS MAX. (15 VDC - dual 100W speakers)
Siren Frequency 700Hz - 1500Hz (Mechanical 700Hz – 1600Hz)
Two-Tone = 435Hz & 585Hz
Tones / Cycle Rates Mech Wail Yelp Phaser Two-Tone
6 CPM 13 CPM 190 CPM 15 CPS 60 CPM
High Voltage
Protection
16 - 18 VDC will cause siren output to cease, resume at normal
Short Circuit Current 50 AMPS (supply circuit must be capable of supplying this)
Operating
Temperature
-15° F to +140°F
Controls 6-position rotary selector switch (Radio, Standby. Mechanical, Wail,
Yelp, and Phaser).
Dual siren control toggle switch.
Momentary push-button Siren switch.
Front panel mounted PA volume control, Radio adjust on amplifier
Auxiliary input for positive or negative connection.
8-position DIP switch option selector.
Connections
(10-Pin Conn)
(2) Positive, (2) Negative, (3) Speaker, (2) Radio, Control
Size Control Head: 6-1/4" W x 2-7/8" H x 1" D
Amplifier: 8” L x 6-3/4” W x 2-1/8” H
Weight 6 LBS.
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and
information, contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.
See www.carsonsirens.com for latest information.