Filter
Top Products
,%$/-
0-)(#2%027045045/
9.!-2%'.)%$!-
/.2%3
Specifications:
Vortex 2.6 Vortex 4 Vortex 6 Vortex 200V Vortex 3 Quadro
Stereo
1)
16 Ω 250 W 500 W 730 W 1040 W 270 W
8 Ω 480 W 930 W 1350 W 1880 W 490 W
4 Ω 860 W 1570 W 2300 W 3100 W 800 W
2 Ω 1400 W 2300 W 3300 W 2600 W
2)
720 W
2)
Peak 1540 W 2490 W 4090 W 4050 W 1070 W
Mono
16 Ω
3)
960 W 1860 W 2700 W 3760 W 980 W
8 Ω
3)
1720 W 3140 W 4600 W 6200 W 1600 W
4 Ω
3)
2800 W 4600 W 6600 W 5200 W
2)
1480 W
2)
2 Ω
4)
1720 W 3140 W 4600 W 6200 W 1600 W
1 Ω
4)
2800 W 4600 W 6600 W 5200 W
2)
1480 W
2)
Peak
4)
3080 W 4980 W 8180 W 8100 W 2140 W
Output Circuitry
bipolar, Class H
Frequency Response
8 Ω load, 1 dB below rated power
20 Hz - 20 kHz ± 0,15 dB
Input Impedance
40 kΩ balanced
Input Gain
selectable: 26 dB, 32 dB, or 1,4 V input sensitivity
Protection Circuits
inrush-current limitation, protection circuits against power on/off transients, temperature monitoring of
transformers and heat-sinks, output DC protection, power transistor control, temperature dependent SOA
protection, intelligent mains fuse protection
Limiter
3 step switchable peak-limiter
Fan
2 temperature dependent speed-controlled axial fans
Ground-Lift
input ground-lift switch on back panel
Indicators
LED’s for ON, SIGNAL, CLIP, DC, High Temp, Output Current
Input Connectors
3-pin XLR, male and female per channel, pin 2 = in phase
Output Connectors
5)
One 4-pole SPEAKON connector for each output channel (bi-amping possible)
Modes Of Operation
STEREO, BRIDGE MONO and PARALLEL-MONO
Options
Extended User Interface / E.U.I. — modules for any kind of EQ
Signal To Noise-Ratio
20 Hz - 20 kHz, 8 Ω load
> 107 dB (unweighted)
> 110 dB (A-weighted)
THD+N (typical)
20 Hz - 20 kHz, 8 Ω load,
3 dB below rated power
< 0,01 %
SMPTE (typical)
20 Hz - 20 kHz, 8 Ω load,
3 dB below rated power
< 0,01 %
Damping Factor
8 Ω load, 1 kHz and below
> 400
Net Weight
12,4 kg / 27,3 lbs (10,7 kg / 23,6 lbs for Vortex 3 Quadro)
Shipping Weight
15,0 kg / 33,1 lbs (13,5 kg / 29,8 lbs for Vortex 3 Quadro)
Dimensions (WxHxD)
483 x 88,9 x 436 mm / 19 x 3,5 x 17,2 inches (19”, 2U)
Shipping Dim. (WxHxD)
540 x 135 x 615 mm (0,045 m
3
) / 21,3 x 5,3 x 24,2 inches
1) All channels driven, 1 kHz, 1% THD @ 230 VAC 2) Peak Power, component tolerance dependent 3) Mono bridged 4) Parallel mono 5) different at Vortex 3 Quadro
Subject to technical alterations without prior notice.
Input Ground Lift
Mode of operation
(Stereo, Bridged, Parallel mono)
Gain Setting
(26 dB, 32 dB, 1,4 V)
Limiter
(Off, SpP, Clip SpP)
Channel A input
Channel A linkChannel B input
Channel B link
Channel A & B output
Optional Feature Selector
CAI Remote Control & Link