Filter
Top Products
7
Power requirement
The LK10 runs on 24V DC (@ 250mA max) supplied through the connecting cable from
the KP10 keypad. As such there is no mains voltage present in the KP10 and the unit is
often safe to fit in areas where only extra low voltage (ELV) equipment is permitted.
However, it is imperative that you always check the wiring regulations in force for your
application and area.
Faceplates
The LK10 faceplate system is based on the Decora
TM
standard and is interchangeable with
the wide range of faceplates made by manufacturers such as Leviton etc that conform to
this standard. If it is desired to fit another faceplate, it can be replaced by gently prising
apart the LK10 faceplate and snapping on another in its place.
Approvals
This product complies with European Low Voltage (73/23/EEC) and
Electromagnetic Compatibility (89/336/EEC) Directives when used and installed
according to this instruction manual. For continued compliance only Cambridge
Audio accessories should be used with this product and servicing must be referred to
qualified service personnel.
The crossed-out wheeled bin is the European Union symbol for indicating separate
collection for electrical and electronic equipment. This product contains electrical
and electronic equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please return the unit or
contact the authorised dealer from whom you purchased this product for more
information.
LK10
ENGLISH