Filter
Top Products
19
AR30
DR30
ENGLISH
Setting the clock
By default, the clock will set itself according to the clock data transmitted by SIRIUS,
DAB or RDS enabled FM broadcasts. If you are not in a region where you can receive
these transmissions, you can set the clock manually.
To set the clock time:
1. Press and hold the Volume control on the front of the unit to enter the advanced
settings menu.
2. Cycle through the different settings by pressing the Volume control or pressing the
volume control on the remote.
3. When 'Clock Aut' is displayed, rotate the Volume control or the volume control on the
remote to change the setting to 'Clock Man'. Press the Volume control or the volume
control on the remote to confirm your choice.
4. Change the hour by rotating the Volume control or pressing the volume control on
the remote. Press the Volume control or the Menubutton on the remote to confirm,
and proceed to adjust the minutes in the same manner.
5. When you have finished setting the time, press the Volume control or the Menu
button on the remote to return the unit to normal operation.
Setting the time zone (US version only)
If the Sonata AR30 is configured for automatic time-set, and the unit is connected to
a SIRIUS tuner module, it is important to specify the appropriate time-zone for your
geographic region.
To set the time zone:
1. Enter the advanced settings menu and select 'Clock Aut', refer to previous section
'Setting the clock'.
The unit will display the current time zone.See below for the appropriate time zone:
Zone NST = GMT-3h30 (Newfoundland)
Zone AST = GMT-4h (Atlantic)
Zone EST = GMT-5h (Eastern)
Zone CST = GMT-6h (Central)
Zone MST = GMT-7h (Mountain)
Zone PST = GMT-8h (Pacific)
Zone AKST = GMT-9h (Alaska)
2. Rotate the Volume control on the front of the unit until your desired time zone is
displayed. Press the Volume control to confirm
Please continue to set the Daylight Saving Time to either 'DST On' or 'DST Off'. If set to
'On', then USA/Mexico/Canada daylight saving will be observed.
3. When you have finished setting the time zone, press the Volume control to return
the unit to normal operation.