Filter
Top Products
The 340A/340A SE remote control can now control the
basic functions of Apple iPods when mounted in Apple’s
Universal Dock (or other docks or IR receivers compatible
with the Apple Remote). Refer to your dock’s instruction
manual on how to connect it to your amplifier. We
recommend you plug your dock into the auxillary (Aux)
input on the rear of the unit.
To use the Azur remote to control the docked iPod, hold
down the Aux button whilst pressing one of the following
buttons:
Play/Pause
Press to play the iPod, press again to pause play.
Skip
Press once to skip forwards or backwards one track.
Release the Aux button to return the remote control to
normal functionality.
For the 340A SE there is also a dedicated auxillary
MP3/iPod input on the front panel. Plugging a source into
the MP3 input causes the 340A SE to automatically select
the front auxillary input. Remove the plug to return to
normal use.
12 Azur integrated amplifier
REMOTE CONTROL
The 340A and 340A SE are supplied with an Azur remote control
that operates both this amplifier and Cambridge Audio Azur range
CD players. Insert the supplied AAA batteries to activate. The
functions relevant to the amplifier are as follows:
Power
Switches Azur CD players between Standby and On.
Note: The 340A/340A SE is switched On/Off from the front panel
only.
Mute
Mutes the audio on the amplifier. The mute mode is indicated by
the channel LED flashing. Press again to cancel mute.
Volume +/-
Increase or decrease the volume of the amplifier output.
Aux, CD, Tuner/DAB, DVD, AV/MD, Tape Mon
The six source select buttons are used to change the input source
to the amplifier.
iPOD COMPATIBILITY