Cambridge Audio 340A SE Stereo Amplifier User Manual


 
10 Azur integrated amplifier
Power
Switches the unit on and off.
Auxillary MP3 In (340A SE only)
Connect your MP3/iPod/portable music player to the 340A SE with a
3.5mm to 3.5mm jack plug lead. Plugging a source into the MP3 input
causes the 340A SE to automatically select this input. Remove the plug
to return to normal use.
Note: It is possible to use both the front and rear auxillary inputs
separately. The front input is selected by inserting a jack plug, while the
rear input is selected by pressing Aux on the front panel or remote.
Phones
Allows for the connection of headphones with a ¼" jack plug connector.
Headphones with an impedance of 32 and 600 ohms are
recommended. When the headphones are connected, the loudspeaker
relay is released switching off the output to the loudspeakers (speakers
A and B).
Speaker B
Turns on/off the secondary set of loudspeaker terminals on the back
panel. This can be used for listening to an extra set of loudspeakers in
another room.
Note: When using two pairs of speakers, use speakers with a nominal
impedance of between 6-8 ohms each.
azur 340A
Integrated Amplifier
Volume
Balance
Aux CD DVD AV / MDTuner / DAB Tape Mon
Tre bleBass
DirectSpeaker BPhones
Power
FRONT PANEL CONTROLS
1
2
1 3
6
4 5
7
98
10
11
4
3
TrebleBass
DirectSpeaker BPhonesMP3 In
Power
2