To pause a playing CD
Press the PLAY/PAUSE button again. The pause indicator “II” will appear on the display. Press PLAY/PAUSE
again to resume play.
To stop a playing CD
Press the STOP button. The Display shows, “—”.
Note: When you press PLAY again the Player will return to the first song. The Display will show “00” and
then “01”.
To skip forward or backward from track to track during playback
Press the (SKIP>>) button once and the next track will be displayed and begin playing. Press repeatedly to
move forward to the desired track.
Press the (SKIP<<) button once to return to the beginning of the current track. Press repeatedly to skip back
to earlier tracks. Playback resumes from the selected track.
To search forward or backward to a particular point on a track during playback
Press and hold the (SKIP<<) or (SKIP>>) buttons to search forward or backward through the current track.
Playback resumes at the point you release the button.
Program Playback
Up to 20 tracks can be programmed for playback. To program a song sequence:
1. Press STOP first if the CD is playing.
2. Press the PROGRAM button. The CD display will show P:01
3. Press the (SKIP>>) and or (SKIP<<) buttons to select the first track to program.
4. Once the desired track is reached, press the PROGRAM button to enter the track
number into memory.
5. Repeat steps 3 & 4 to program additional tracks.
6. Press the PLAY/PAUSE button to start programmed playback.
Note: The program will be erased when you press the CD PROGRAM button.
Repeat CD Selections
Repeat one or all programmed selections using the CD REPEAT button. Push the button once to replay any
single selection. Push the button twice to replay all programmed selections (in programmed order). Push
the button three times to clear the REPEAT function. “REPEAT ONE” or “REPEAT ALL” will appear on the CD
PROGRAM DISPLAY when the CD REPEAT button is pushed.
AM/FM Radio Operation
The 2385AV-02 and 2395AV-02 feature an AM/FM PLL (phase locked loop) stereo radio and telescopic
antenna for local AM and FM stereo reception. To operate the radio:
1. Plug the unit in.
2. Set the FUNCTION selector to Radio.
3. Extend the telescope antenna.
4. Select AM, FM or FM Stereo reception band.
12 5