Filter
Top Products
F. TROUBLE SHOOTING
NO SOUND
-
Too much water retention inside the speaker grill. Turn the speaker over and gently shake it to let the
water drain out.
-
Ensure you have fresh alkaline batteries for both transmitter and receiver if the speaker’s and/or
transmitter’s battery charge is too low, sound distortion will be heard. Replace with new batteries.
-
Ensure the audio component is ON and its volume is set to at least 50%.
-
The connected audio equipment is not playing. Start playing the equipment.
-
The volume of speaker is too low, adjust the volume to an appropriate level. Adjust your audio source
component volume to maximum.
DISTORTED
-
Too much water retention inside the speaker grill. Turn the speaker over and gently shake it to let
the water drain out.
-
Press the “Scan” button on the speaker to best match the frequency of the transmitter.
-
Change the position of the channel selector on the transmitter. You must then press the “Scan”
button on the speakers.
-
Battery capacity is too low. Replace with the new batteries.
-
Ensure the volume level of speakers is adjusted properly.
-
The speaker is too far from transmitter, move closer.
-
The input level of the audio signal is too low. Turn up the volume of the audio source equipment.