Filter
Top Products
Page 6 CCRadio2
The CCRadio2 will run on (4) “D” size NiMH or alkaline batteries or on
120V AC house current using the included power cord. Batteries are
optional. The batteries are necessary to retain the timer, clock, and
memory settings if the power cord is removed from the radio for more
than three minutes.
Rechargeable batteries work well in this radio. The Battery Power Level
Indicator will be lower because the total voltage is lower for recharge-
able batteries.
Before powering your radio be sure to read
the Safety Instructions on pages 27 and 28.
Before you plug the AC cord into the radio be sure the AC voltage is
120Volts/60Hz. If you have batteries in the radio and you use the AC
power cord, the batteries will automatically be disconnected.
NOTE: If you remove the power cord without turning the radio OFF, the
radio will automatically revert to the batteries.
Insert the plug on the end of
the supplied power cord into
the AC power jack on the
back of the radio.
Getting Started
POWERING YOUR RADIO
AC OPERATION
ƽ