Filter
Top Products
Page 4
BA-200 Front Panel
1. Power Button:
2. STAND BY LED:
3. ACTIVE LED:
4. PROTECT LED:
This button manually supplies power to the amplifier
When lit, this LED (light emitting diode) indicates that the BA-200 is plugged into an AC outlet.
When lit, this LED indicates that the amplifier is in normal amplification mode.
When lit, this LED indicates that the amplifier has overheated or is experiencing an external short in the audio signal, causing it
to shut down.
BA-200 Back Panel
1. Control:
2. Audio:
3. Speaker Output:
4. AC Power:
This mono 3.5 mm mini jack is the voltage trigger that powers on the BA-200 when3-30volts are present.
This stereo 3.5 mm mini jack receives an audio signal from an external source such as
the BreatheAudio Elevate Audio Distribution System.
This amplified output provides 100 watts per channel audio output to external speakers.
The detachable AC power cord can be plugged into any grounded AC power source.
MODEL BA-200
HIGH EFFICIENCY 200 WATT STEREO AMPLIFER
POWER ACTIVE PROTECT
STAND BY
MODEL BA-200
HIGH EFFICIENCY 200 WATT STEREO AMPLIFER
POWER ACTIVE PROTECT
STAND BY
1
2
3
4
CONTROL
AUDIO
OUTPUTPOWER
MODEL BA-200
SPEAKER
INPUT
8OHM: 70WX2
4OHM:100WX2
LEFT
RIGHT
-
-
+
+
HIGHEFFICIENCY200WATT
STEREOAMPLIFIER
FUSE:T3AL 250V
120V
60Hz
250W
www.breatheaudio.com
CincinnatiOhioUSA
WARNING:
AVERTISSMENT:
TOREDUCETHERISKOFFIREORELECTRICSHOCK.
DONOTEXPOSETHISEQUIPMENTTORAINORMOISTURE
ARINDEVITERLESDANGERSD INCENDIE
ETDELECTROCUTION,NEJPASEXPOSER
CETAPPAREILALAPLUIE NIALHUMIDITE.
USE ONLYWITH 250V FUSEUSE ONLYWITH 250V FUSE
3033118
C
US
I
N
T
E
R
T
E
K
C
M
CONFORMSTO
ULSTD. 60065
CERTIFIEDTO
CAN/CSASTD.
C22.2
1
2
3
4