Filter
Top Products
4
12.6–14.4VDC
B+ B+
GROUND
GND
GND
FUSE 4 x 25A
SPEAKER OUTPUT
L
R
MONO
LOWPASS
OFF
ON
HIGHPASS
OFF ON
5
0.2
INPUT SENSITIVITY 2.6
50
350
Hz
200
20
350
Hz
185
0.7
1.2
Q/HP
0.95
LOWPASS SLOPE
12dB
24dB
MONO
12dB
ST
INPUT
STEREO
MONO
L
SUBWOOFER LEVEL
OFF
ON
REMOTE
INPUT SUBWOOFER LEVEL
Control Functions
RCA Inputs
RCA cables from head unit or from other line level device should be connected
here. Use both inputs (L and R) for stereo; use “L” input for mono.
Remote Input
Use the supplied FEMALE quick-connector to connect the REMOTE trigger lead
from the head unit to the amplifier. Amplifier turns “ON” when head unit is turned
“ON.” One FEMALE .210" connector is supplied with amplifier.
Input Switch
In the left position, the L and R inputs go to the L and R channels of the amplifi-
er. In the right position, the input is for mono operation.
Input Sensitivity Control
Turn control clockwise to increase the amplifier sensitivity to incoming signals. Turn
control counterclockwise to decrease the amplifier sensitivity.
Highpass Crossover Controls
To use 12dB/octave crossover, move HIGHPASS switch to right-hand position.
Highpass crossover frequency is adjustable from 20Hz to 350Hz by rotary control.
(Moving switch to left-hand position will bypass crossover functions.)
INPUT
STEREO
MONO
L
5
0.2
INPUT SENSITIVITY 2.6
HIGHPASS
OFF ON
20
350
Hz
185
1
2
1
2
3
4
5
12.6–14.4VDC
B+ B+
GROUND
GND
GND
ON
SAFE
STATUS
L R
MONO
4
8
6
7
5
3
2
1
GT-28 Top Panel Shown
GT-28 Front Panel Shown
9
10
9