Boston Acoustics GT-2200 Stereo Amplifier User Manual


 
1
2
3
4
7 985 6
1
0
10
1 4
7
985
6
10
10
1
2
3
4
7 985 6
1
2
3
4
7 985 6
GT-2300
GT-2200
GT-2125 GT-275
Controls
5
Controls
Stereo/Mono Switch
Remote Gain OFF/ON Switch (ON when using GT-RSL)
Lowpass Slope Switch (12dB Stereo, 12dB Mono, or 24dB Mono)
Lowpass Crossover OFF/ON Switch (OFF/12dB/24dB on GT-275)
Lowpass Frequency Adjustment (50Hz to 350Hz - continuously variable)
Input Sensitivity (250mv to 8.0v - continuously variable)
Highpass Crossover OFF/ON Switch
Highpass Crossover Q-Tune
Adjustment (0.707 to 1.6 - continuously variable)
Highpass Frequency Adjustment (20Hz to 350Hz - continuously variable)
Fuse (replace with same value mini ANL only, refer to specifications on page 3)
Status LEDs
Red
Orange
The Boston Logo will illuminate “Red” under normal operating conditions.
The Orange LED (not visible unless lit) will illuminate during start-up and under fault conditions. If this
is illuminated after start-up, please refer to troubleshooting on page 12.