Filter
Top Products
12
Connection Instructions
Front Connections
1. Connect the local source to either the Left
and Right RCA Inputs (Figure #1) or to the
High Level In speaker level inputs
(Figure #2).
Note: Do not connect wires to both the RCA
and High Level inputs.
2. If used, connect the local source trigger to
the 12V Trigger / Video In (Figure #3).
3. If used, connect the local source trigger
output to the 12V Trigger / Video Pass
Through (Figure #4).
4. If the rear power connection is not used,
connect the power supply input to the
15VDC input (Figure #5).
Note: Only needed if rear power input is not
used.
Figure #1
Figure #3
Figure #5
Figure #2
Figure #4
1
2V Trigger /
V
ideo Pass
Through
1
2V Trigger /
Video In
A
B
C
D
E
12V Trigger /
Video Pass
Through
12V Trigger /
Video In
A
C
B
D
E
F
A.
Left and Right RCA Inputs
B. 15VDC Power Input
C. 12V Trigger / Video In
D. 12V Trigger / Video Pass Through
E. Left and Right High Level Inputs
Fr
ont Connection Diagram