Filter
Top Products
7
Selecting a Source
Using the Front Panel Controls
1
Turn the MODE control until the
source you want is highlighted
with brackets. Note that other
function and alarm setting control
icons also may be selected.
2
Press the MODE control to select
the highlighted item. Or just wait
a few seconds and the source
is automatically selected. The
Duo begins playing the source
selected.
Using the Remote Control
Press the button for the source
you want to select. Press the FM and AUX buttons once for FM 1 or AUX 1 and twice for FM 2 or AUX 2.
Notes:
• There are FM 1 and FM 2 source options. They correspond to the two FM radio preset groups.
• There are Aux 1 and Aux 2 source options. Aux 1 is the front panel input. The Aux 2 input is on the rear
panel.
Tuning In a Radio Station
Using the Front Panel Controls
1
Use the MODE control to select
the AM radio source or one of the
FM radio sources.
2
Turn the TUNE control until the
station frequency you want shows
in the display.
Using the Remote Control
1
Press the AM or FM radio source
button.
2
Press the
[
or
]
button once
to step up or down the radio band
to the next station frequency.
Notes:
• If the radio source you want is already selected you can skip step
1
and use the front panel TUNE control
or the remote
[
or
]
buttons to tune in a new station.
• If the station you select has been assigned to a station preset, the preset indicator and number are
displayed.