Filter
Top Products
BV7300 User’s Manual - page 19
Data disc playback
When you insert a data disc including audio
(MP3), movie (MPEG4) or picture (JPEG)
fi les into the disc slot, the following main
menu will appear:
Press the DISP to switch to the following
interface.
Use the cursor buttons (▲/▼/◄/►) to
select the required fi le type (Music
, Picture or Movie ) or a folder / fi le
on the screen you wish to play, then press
the ENTER button to confi rm your selection.
Playback type icons:
AUDIO Playback mode (default)
JPG Playback mode
MOVIE Playback mode
In JPEG playback mode or MOVIE play-
back mode, press the (STOP) to return to
the main menu.
USB playback
This disc player features a front panel USB
interface (10). A USB device can be con-
nected to this port.
When you insert a USB device into the
USB connector, the DVD player will read
the USB automatically.
The unit gives priority to a disc or SD/MMC
card. If you insert a disc into the disc slot or
insert a SD/MMC card into the SD/MMC in-
terface while playing from the USB device,
the unit will play the disc or the SD/MMC.
Press the MODE button to switch to the
USB playback mode.
Note:
When reading the USB device, please don’t
unplug it. If the player is unable to read the
device, check if the device is in good condi-
tion. You may also try removing the device
fully from the port, and reinserting it again.
- The main unit can only support the stan-
dard USB-memory format approved by
Microsoft.
- USB MP3 player is not a “standard,” which
means different brands or models have
their own standards. Therefore, this unit
may not support every MP3 player.
- When connecting an MP3 player which
has a normal non-rechargeable battery in
the player, you should remove the battery
from the MP3 player before you connect it
to the USB port. Otherwise, the battery may
explode.