Filter
Top Products
11
CD changer, tape
deck, or VCR
Audio output jacks
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
Wave Radio/CD.
AUX IN jacks
Television or
computer
Audio output jacks
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
Wave Radio/CD.
AUX IN jacks
Stereo cable with
male-to-male RCA
plugs
AUX IN jacks
Bose
®
Lifestyle
®
music system
Powered speakers
with volume
control
Speaker system input
(as described in the
speaker owner’s
manual)
LINE OUT jacks
Headphone jack
For best sound, set
the player volume
control to approxi-
mately
3
/
4
of maximum
volume.
Portable tape player
AUX IN jacks
One miniplug-to-
stereo audio cable
Use the audio input
cable that came with
your speakers.
If your powered speaker audio input
cable has three connectors on each
end, use only the two connectors that
look alike to connect to the Wave
Radio/CD outputs. DO NOT USE THE
THIRD CONNECTOR.
Connecting speakers to the LINE OUT
jacks (fixed output) does not shut off
the Wave Radio/CD speakers, although
they can be MUTED while listening to
the external speakers.
Setting Up
®
Connection at Connection at
Component Cable component Wave Radio/CD Note
Use a standard RCA
cable for a TV with
stereo output jacks.
Use a standard Y
adapter for a TV with a
single (mono) audio
output jack.
You may need a special
adapter (such as a
miniplug stereo audio
cable) for a TV with a
headphone outlet.
TAPE (REC) jacks
One stereo audio
cable
You can record from your Wave
®
Radio/CD using the connections from
the LINE OUT jacks.
To make sure the sound seems to
come from the screen, place the
Wave Radio/CD within a few feet of
the TV. If there is any interference
with the TV picture, move the Wave
Radio/CD farther away.
CAUTION:
To prevent interference
with the screen image, keep the
Wave Radio/CD at least 12 inches
from the TV, a computer, or other
monitors.
AUX
IN
L
R
AUX
IN
L
R
AUX
IN
L
R
AUX
IN
L
R
L
R
LINE
OUT
®
®
®