6
Setting Up
English
Place the center speaker
The center speaker provides center channel surround sound per-
formance while taking up very little space. The slim, low-profile
design allows it to fit directly on, above, or below your television
(Figure 2). Rubber feet ensure stable positioning and magnetic
shielding prevents video screen discoloration.
CAUTION:
The VCS-10
®
speaker is not designed to be set on end
in a vertical position, mounted on a wall, or to support the addi-
tional weight of items placed on top of the speaker, which could
also hamper its performance. Do not allow debris or water from
plants, or other items on a shelf above, to fall on the speaker.
CAUTION:
Do not install near any heat sources, such as radia-
tors, heat registers, stoves, or other apparatus (including amplifi-
ers) that produce heat.
For full enjoyment, follow these placement guidelines:
• Place the speaker on, or very close to, your television set and
center it with the screen.
• Be sure to set it on a level surface.
• Apply additional rubber feet farther in from the edges, as
needed, for greater stability (Figure 3).
CAUTION:
Be sure the center speaker is in a stable position and
does not extend beyond the edges of its support. Use additional
rubber feet as needed to prevent it from tipping or falling from a
television surface that is not completely level.
Figure 2
Alternate choices
for placing the
center speaker
Figure 3
Adding optional
self-adhesive feet
to the bottom of
the center speaker
Pre-attached
feet (2 of 6)
Optional self-adhesive feet
(4 supplied)
257528_00 VCS Eng.book Page 6 Monday, July 2, 2001 8:45 AM