Filter
Top Products
24
Setting Up Additional Rooms For Sound
Setting up remote controls for other rooms
To set up the RC18S or RC38S remote:
1. Remove the remote control battery cover and locate the microswitches (Figure 19).
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match the house code
settings in your main room remote.
3. This remote is shipped from the factory set for room B. If this remote is used beyond a
second room, set switches 6, 7, 8, and 9 to the same room code as set in the Lifestyle
®
stereo amplifier.
Note: Refer to your Lifestyle
®
system owner’s guide for more information on operating your
system in more than one room.
Figure 19
Microswitch settings for
RC18S and RC38S
remotes
To set up the Personal
®
Music Center II:
Refer to the owner’s guide included with the Personal
®
music center II for instructions on
configuring this remote for other rooms.
ON
Room 6 7 8 9
B
Down Down Down Up
C
Down Down Up Down
D
Down Down Up Up
E
Down Up Down Down
F
Down Up Down Up
G
Down Up Up Down
H
Down Up Up Up
I
Up Down Down Down
J
Up Down Down Up
K
Up Down Up Down
L
Up Down Up Up
M
Up Up Down Down
N
Up Up Down Up
O
Up Up Up Down
RC18S or RC38S
remote