Bose 25 Series II Stereo System User Manual


 
6 October 29, 2001 AM196575_05_V.pdf
Setting Up
Selecting the locations for your Lifestyle
®
25 Series II system
When you place your speakers according to the guidelines below, a combination of reflected
and direct sound provides the audio atmosphere of a home theater. You may experiment with
the placement and orientation of the cubes to produce the sound most pleasing to you. For
more discussion of speaker placement and room acoustics, see Fine-tuning your system
on page 29.
Speaker locations
Follow these guidelines to select locations that provide the maximum home theater effect
from your Lifestyle
®
25 system (Figures 2 and 3).
CAUTION:
Choose a stable and level surface for your speakers. Vibration can cause the
cube speakers to move, particularly on smooth surfaces like marble, glass, or highly polished
wood. If you are placing the center speaker on top of the television, use the smaller of the two
sets of rubber feet provided. You may obtain additional rubber feet (part no. 178321), free of
charge, by contacting Bose
®
Customer Service (see listings on the inside back cover).
Left and right front speakers
The sound from the left and right front speakers should seem to appear at the edge of the
picture, so that the acoustic image is close to the size of the visual image (Figure 2).
1. Place the cubes so that they line up with the center of the TV screen.
2. Place them up to 3 feet (1 m) from the edge of the TV screen.
We recommend a maximum distance of 3 feet (1 m) so that the sound does not become
too separated from the picture. You may wish to vary this distance based on room condi-
tions and personal preference. The front cables allow the cube speakers to be placed up
to 20 feet (6.1 m) from the Acoustimass module.
3. Direct one cube of each array forward. Direct the other cube toward the wall or in a
different direction to create reflected sound. (See the illustration of reflected sound pat-
terns in Figure 3.)
Note:
The cube speakers are magnetically shielded so you can place them close to the
TV without affecting picture quality.
Center speaker
The sound from the center speaker should appear to come directly from the center of the
picture (Figure 2). The center speaker cable allows up to 20 feet (6.1 m) distance from the
Acoustimass module.
1. Place the center speaker directly above or below the center of the TV screen, or at the
closest convenient location.
2. Align the speaker with the front of the TV screen (not pushed to the back of the TV).
3. Direct each of the cubes slightly away from center, to create a wider area of direct sound
(Figure 3).
Note:
If you put the speakers in a bookcase unit, be sure to place each one at the front
edge of the shelf. Placing speakers in an enclosed space can change the tonal quality of the
sound. This effect is minimized if the shelves are filled with books.