Filter
Top Products
Changing ear tips
1. Gently remove the
existing ear tip by
peeling up from its
large rounded side.
2. Align the triangle on
the replacement ear
tip with the triangle
on the headphone.
3. Press the ear tip
securely into place
until you feel it latch.
The large rounded
side of the ear tip
should completely
cover the triangle on
the headphone.
Connecting to an audio device
You can connect the headphones to any
device that has a 3.5 mm stereo plug.
1. Turn down the volume of the audio device.
2. Plug the headphones into the audio
output jack on the device.
3. Put on the headphones.
4. Slowly turn up the volume on the device.
Using the “enhancement” features
of audio devices
Many portable audio devices include features
or settings which electronically alter the audio
signal sent to the headphones. These may
include “bass boost” or other EQ settings.
Other features may serve to limit volume out
such as “sound check” or “volume limit.”
Finally, other features add spatialization
effects such as “Surround”, “SMS”, “WOW”,
or “3D.”
The Bose
®
in-ear headphones were designed
to deliver high quality, balanced sound and
deep, low notes without the need for any arti-
ficial enhancement. Therefore, when using
the headphones we recommend that you first
turn off all the enhancement features before
making any personal adjustments to the
audio settings.
Using the case
A high quality case is provided to protect the
headphones as well as to help keep the cable
from tangling.
1. For easiest use, open the case fully and
hold the case as shown (A).
2. Place the headphones in the case as
shown (B).
3. Wrap the cord around the holder, in either
direction.
4. Press the plug in place as shown (C).
1
2
3
Triangles
Ridge
(on nozzle)
A
B
C
01_Bose_IE_ENG.fm Page 2 Friday, March 16, 2007 11:25 AM