Filter
Top Products
6 October 22, 2001 AM19464_02_V.pdf
English
Setting Up
A suggested home theater layout that conforms to the guidelines described above is shown
in Figure 2. Twist the pairs of cube speakers so they describe angles that create room-filling
sound patterns.
You may choose to place the speakers differently, to take advantage of the sound character-
istics of different rooms. Your speakers come with sufficient cable lengths to allow you to
have the following distances between components:
• Up to 20 feet (6 m) between the Acoustimass
®
module and the receiver.
• Up to 20 feet (6 m) between the Acoustimass module and the front and center cube
speakers.
• Up to 50 feet (15 m) between the Acoustimass module and the surround speakers.
Bose wall brackets and floor stands can extend your placement options. See “Accessories”
on page 15.
Note:
Please follow wall bracket instructions carefully. Proper mounting will insure optimum
performance from your system.
Figure 2
One suggested home theater
layout
Selecting the locations for your speakers
The cables provided with your Acoustimass 10 Series II system vary in length, allowing a
great deal of flexibility in speaker placement. Use the following placement suggestions as
general guidelines. Choose convenient speaker locations that give you good sound.
Left and right front cube speakers
Figure 3 shows suggested ways to achieve an accurate left and right sound image.