Filter
Top Products
34
Service Information
To Replace the 12" Woofer in the Panaray LT MB24-III Modular Bass Loud-
speaker
1. Turn off amplifier power
2. Disconnect the loudspeaker input connection(s)
3. Remove the 22 screws securing the grill to the enclosure. Lift the grill off of the enclosure.
4. Remove the 8 screws securing the driver to the enclosure.
5. Lift the driver out of the enclosure.
6. Remove the old gasket.
7. Disconnect the RED (+) and BLACK (-) wires connected to the driver.
8. Replace gasket.
9. Make the following connections to the new driver:
• Connect the RED (+) and BLACK (-) wires connected to the new driver.
10. Insert new driver to the cabinet and secure with the 8 screws.
11. Reconnect the input connections.
12. Turn on amplifier power.