Filter
Top Products
4 December 20, 2001 AM183644_01_V.pdf
Before you begin
Bose
®
Virtually Invisible
®
speaker technology allows you to enjoy lifelike home performances
from the very latest surround sound encoded movies, CDs, and television shows, without a
room full of speakers.
Your stereo VCR or stereo television sends the encoded program material to the surround
sound receiver, which interprets it by distributing various sounds to particular speakers.
Although the sound mix varies with different types of programs, dialogue is usually sent to
the center speaker while sounds from the left or right side of the picture go to the left or
right front speakers. Ambient sounds and special effects are directed to one or both of the
surround (rear) speakers. The unique, easy-to-hide Acoustimass
®
module delivers bass for
all channels. At any point in a surround sound performance, you may hear sound from all or
just a few of the speakers, but the overall experience puts you in the center of the action.
To select surround-encoded program material, look for any of the terms Surround, Dolby
Surround, and the double-D symbol * on tapes and discs, and the
word “surround” preceding a TV broadcast. Your Acoustimass-10 home theater speakers
are also compatible with Dolby AC-3 receivers and program material. The special settings
for Dolby Surround and AC-3 are described on page 11.
You can also enjoy a wide variety of stereo programming that is not surround-encoded with
your Acoustimass-10 speakers. Simply adjust your receiver accordingly.
Setting Up
* Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
WARNING:
The Acoustimass module
weighs 23 pounds (10.5 kg).
Use good lifting practice to
avoid injury.
To avoid danger of suffoca-
tion, keep the plastic bags
that wrap these speakers out
of the reach of children.
Figure 1
What comes in the carton:
• Acoustimass module
• Module end cover
•5 cube speaker pairs
• 20' (6 m) speaker input cable
• 20' (6 m) front speaker output
cable
• 50' (15 m) rear speaker output
cable
• 8 protective rubber feet
• Owner’s Guide
Unpack the carton
• Remove any staples from the opened carton flaps.
• Remove the brown inner carton containing the five cube speaker arrays and the Acous-
timass module terminal cover.
• Gently roll the carton over onto its side and then onto its opening.
• Carefully lift the carton from around the Acoustimass module and packing cushions.
• Do not detach the removable cables connected to the Acoustimass module.
• If the speakers or the Acoustimass module appear damaged, do not use them. Repack
everything in the original carton and contact your authorized Bose dealer immediately.
Note:
Now is a good time to record the serial number of these speakers on page 2 of this
guide and on your warranty card. It is a good idea to save all packing materials for possible
future use.