Filter
Top Products
18
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
REVIEWING YOUR SETUP SELECTIONS
Adjusting the system setup
After performing the initial system setup using the
Unify™ intelligent integration system, you can make
additional changes to your system setup at any time.
Choices in the menu
To display the Unify menu on your TV, press the Setup
button on the front of the control console. Using the
navigation buttons on the remote, select the function
you want and follow the instructions on the screen.
NOTES:
1. Appears only if initial setup is incomplete.
2. Appears only if initial setup is complete.
3. Appears for each source connected to the control console rear.
Menu item What you can do
Resume initial
setup (Note 1)
Return to the interactive setup process at the
last completed event.
Restart initial
setup (Note 1)
Start the interactive setup process from the
beginning.
Language Change the language of the on screen
display.
ADAPTiQ
®
Start the ADAPTiQ audio calibration process.
TV setup
(Note 2)
• Program your remote to control your TV.
• Replace your TV.
• Add, change, or remove the TV audio
connection.
Source setup
(Notes 2
and 3)
• Change a device name.
• Program your remote to control a device
and add the IR emitter if needed.
• Remove a device.
• Add or change audio or video connections.
Add a device
(Note 2)
Add another device or accessory to your
system.
Homewide
(Note 2)
(Available
only for 235,
V35, and V25
systems.)
• Select the house code mode: Standard
(16 house codes, 16 room codes) or
Alternative (64 house codes, 4 room codes).
• Change the room code.
• For more information on Homewide expan-
sion, see “Adding Sound to Another Room”
on page 19.
Update Perform a system software update (see
“Performing a system software update” on
page 23 for more information).
Teach mode
(Note 2)
Send IR codes to program a learning remote.
Exit the Unify
system
Returns you to the last source selected.
Menu item What you can do
00.Amaryllis_OperatingGuide.book Page 18 Wednesday, July 14, 2010 2:09 PM