Filter
Top Products
4
YOUR REMOTE CONTROL
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
Information display
(on 235, V25, and V35 systems only)
The display provides operating and system status
information.
Examples:
• Source identification
•Volume
• Radio tuner
•iPod
• Operating prompts
Remote glow button
Pressing the glow button on the rear of the remote
illuminates the remote buttons and display. The light
turns off automatically after several seconds to prolong
battery life.
Cable
Cable
43
FM P1
90.9 - WBUR90.9
iPod
Album
Hold number key
to set preset
Glow button
To adjust the illumination level:
Note: If the currently selected
source is AM or FM, switch to any
other source before making the
adjustment. This prevents uninten-
tionally deleting a radio preset.
1. Press and hold the Glow and
OK buttons at the same time
for 5 seconds.
2. Press the up/down navigation
button to select Brightness or
Contrast.
3. Press the left/right navigation
button to decrease or increase
the illumination level.
4. Press either the OK or Glow
button to return to normal
operation.
00.Amaryllis_OperatingGuide.book Page 4 Wednesday, July 14, 2010 2:09 PM