Filter
Top Products
6 en | Safety Instructions MIYN46 Wall Transmitter
970.035b | F.01U.278.521 | v2.0 | 2012.12 User Manual US Bosch Security Systems
2 Safety Instructions
2.1 Introduction
2.1.1 Principle
2.1.2 Importance of safety instructions
Each safety and protection instruction in this manual must be adhered to in order to avoid
personnel injuries, property damages or environmental pollution.
In a similar manner, the legal bylaws, the measures in prevention of accidents and for the pro-
tection of the environment, as well as the recognized technical rules aiming at appropriate
and safe working conditions which as applied in the country and at the place of use of the
MIYN46 Wall Transmitter must be adhered to.
2.1.3 Disregarding safety rules
Disregarding the safety rules, as well as existing legal and technical regulations, may lead to
accidents, to property damages or to environmental pollution.
2.2 Environmental conditions
Install the MIYN46 Wall Transmitter in a dry place, away from any source of heat.
!
WARNING!
The User / Installer should read and understand this chapter before any intervention on the
MIYN46 Wall Transmitter.
i
NOTICE!
In case of unclear information, please contact your local representative.
!
WARNING!
The MIYN46 Wall Transmitter must not be located near a water tap or any other source of
water.
The electrical safety of the MIYN46 Wall Transmitter is only guaranteed if the electrical instal-
lation is in accordance with the national regulations and if this installation works properly.
The MIYN46 Wall Transmitter may not be used in buildings prone to fire and explosion haz-
ards.
!
CAUTION!
The MIYN46 Wall Transmitter may not be used under exposure to the direct sunlight, to heat,
to dust or to an excessive humidity (only use the equipment in a clean environment).
!
CAUTION!
Interferences
Avoid immediate proximity to other electric devices such as a television.