Filter
Top Products
Notice
Every effort was made to ensure that the information in
this guide was complete and accurate at the time of
printing. However, information is subject to change.
FCC Statement (Part 15) - Radio Frequency
Interference
The Digital AM/FM Tuner generates and uses radio
frequency energy and if not installed and used in strict
accordance with the manufacturer's instructions, may
cause interference to radio and television reception.
Testing is being conducted for compliance with the limits
for a Class B device in accordance with the specifications
in Part 15 of the FCC Rules and Canadian D.O.C.
regulations. This testing is designed to provide reasonable
protection against such interference. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to
radio or television reception, which can be determined by
turning the Digital AM/FM Tuner unit off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient the radio or TV receiving antenna.
- Relocate the Digital AM/FM Tuner unit with respect to the
radio or TV receiver or vice-versa.
- Plug the Digital AM/FM Tuner unit into a different outlet
so that it and the radio or TV receiver are on different
branch circuits.
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet,
"How To Identify and Resolve Radio-TV Interference
Problems," helpful. This booklet was prepared by the
Federal Communications Commission (FCC) and is
available from the U.S. Government Printing Office,
Washington, DC 20402.
Stock order No. 004-000-00345-4.
Important Safety Information
Always follow these basic safety precautions when
installing and using the unit:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
product.
3. DO NOT block or cover the ventilation slots and
openings. They prevent the product from overheating. DO
NOT place the product in a separate enclosure or cabinet,
unless proper ventilation is provided.
4. Never spill liquid on the product or drop objects into the
ventilation slots and openings. Doing so may result in
serious damage to the components.
5. Repair or service must be performed by a factory
authorized repair facility.
6. The product is provided with a UL-CSA approved, 3-
wire ground type plug. This is a safety feature. DO NOT
defeat the safety purpose of the grounding type plug. DO
NOT staple or otherwise attach the AC power supply cord
to building surfaces.
7. DO NOT use the product near water or in a wet or
damp place (such as a wet basement).
8. DO NOT use extension cords. The product must be
installed within 6 feet of a grounded outlet receptacle.
9. DO NOT install telephone wiring during a lightning
storm.
10. DO NOT install telephone jacks in a wet location
unless the jack is specifically designed for wet locations.
11. Never touch uninsulated wires or terminals, unless the
line has been disconnected at the paging or controller
interface.
12. Use caution when installing or modifying paging or
control lines.
Support Information
Paging systems integrated with small phone systems
such as Merlin Legend and Partner are supported by the
National Service Assistance Center (NSAC). The main
number for the NSAC is 800-628-2888. Paging systems
integrated with large switches such as the DEFINITY G3
are supported by the Technical Service Center (TSC).
The main number for the TSC is 800-242-2121.
Domestic and International Approvals
UL Listed 538C; FCC Part 15.
Page 2 of 4
© 1999 Bogen Communications, Inc.
All Rights Reserved. Printed in Korea.