Filter
Top Products
Specifications
* Both channels driven at nominal line voltage 120V AC, 60Hz.
11
Power Output* 600W /Ch @ 70V 450W / Ch @ 70V 300W / Ch @ 70V
Input Sensitivity 1V
S/N Ratio (20K BW) 104dB ref. 70V, F.P.
Class of Operation H
Product Weight 46 lbs. 44 lbs. 41 lbs.
Connector: Power 20A line cord 15A line cord 15A line cord
Input Pluggable 3-pin terminal strips
Output 5-pin "touch-proof" Barrier Strip
Power Bandwidth 20-40kHz .5% THD
THD @ 1kHz Rated Power less than .02%
Rated Load Impedance (per Ch.) 8 ohms 11 ohms 16 ohms
Frequency Response @ 1 watt 20-20kHz +/- 0.25dB
Output Regulation (1kHz direct) 1.5dB @ 70V
Inputs 10k-ohm electronically balanced, 3-pin pluggable terminal strip
Low-Cut Filter 60Hz, 2nd order roll-off, switch defeatable per channel
AC Input Voltage Range 95-130V AC, 60 Hz
Indicators Status, Limit, Signal, AC Power Status (Rear)
Temperature Range 15 to 105 degrees F
Cooling Dual Forced Air Variable Speed Fan
Physical Dimensions (W x H x D) 17" x 3.5" x 16"
Protection RF, DC, Low-frequency, Thermal, Low-impedance, Circuit Breaker, Short Circuit
Special Features Sequential Turn-On Circuitry (defeatable), Sleep Mode (defeatable),
Back-Slope AC voltage regulation, Toroidal Power Transformer
X600 X450 X300